bit-tech.net

Orac³ Part 1

Orac³ Part 1 Part One Complete Orac³ Part 1 Part One Complete
Power on and the divider lights up perfectly! The light is even all around and looks even better in reality.


Orac³ Part 1 Part One Complete Orac³ Part 1 Part One Complete
Here it is so far - basically a PSU, water reservoirs and a start on the front panel switches. Since I plan on going to the same effort on all the other components and following the same themes I think it will look pretty reasonable once finished.


Orac³ Part 1 Part One Complete Orac³ Part 1 Part One Complete
The pass-thru of all the PSU wires to the attached junction box and detail of the fasteners securing the top plate of the case - 6mm cap screws, dome nuts and washers, all stainless steel.


Orac³ Part 1 Part One Complete
Top of the case: The white LED in the front will be spotlighting the name of the case at the top of the front bezel.


Orac³ Part 1 Part One Complete
Reservoirs with the hoses snaking past them.


Orac³ Part 1 Part One Complete
Power Supply powered up.


Orac³ Part 1 Part One Complete
The top of the case - pretty much complete but for the wiring up of a lot of jack plugs!