The Reflection HTPC by Wolverine

The switches and final hardware

Now that I had the hardware all hooked up, I wanted to try it out so that I could do a full test of the system and fire up the LCD.

The case was starting to look as I wanted it, but there were still I few things to do, like a power and reset switch. To fill that job, I choose chrome vandal resistant switches because these babies just fit the theme perfectly.

First off, I drilled a couple of holes. Then I filled the holes with the switches, hooked 'em up and Voila!

Now all that is left is the corners and to replace the old dead drives with a couple of fresh ones. So, lets do the drives first, shall we? The mock-ups were removed and replaced with two shining new 1TB Drives from Seagate.

With that done, there's just one thing left - the corners.