Excellent series so far, and good to see that you've opted for tools that are within everyone's reach. Not everyone can get access to CNCs, laser cutters, 3D printers, etc.
Although I didn't realise that a Dremel's routing bit would be that handy; now that I think about it, it makes perfect sense... I really will have to check which bits by dremel-clone came with (and whether it's the attachments I was using or the collets that are wonky...)
I wouldn't have thought using a glue gun on acrylic would stick very well, especially around the USB ports. Anyway it was a nice little read, thanks BT.
Originally Posted by Dave Lister I wouldn't have thought using a glue gun on acrylic would stick very well, especially around the USB ports. Anyway it was a nice little read, thanks BT.
The glue gun seems to have worked very well - we'll be keeping an eye on it, though. Thanks to everyone who's enjoying it so far!
Combatus, on a mostly unrelated subject, do you have any recommendations for cheap and cheerful cases for a WCing setup? Probably need at least a 360 or equivalent as the GPUs are SLI 480's.
Originally Posted by Parge Combatus, on a mostly unrelated subject, do you have any recommendations for cheap and cheerful cases for a WCing setup? Probably need at least a 360 or equivalent as the GPUs are SLI 480's.
Oh, budget is around £100 but I don't mind buying second hand.
Several spring to mind although a triple 120mm and budget don't usually go hand in hand! Also take a look at the case mod index - plenty of water-cooled cases in there such as this NZXT Phantom with a triple in the roof.
Cooler Master ATCS 840
Cooler Master Cosmos S
Many of the larger Corsair cases
Also this one by BitFenix looks like it might well fit a triple 120mm rad in the roof, if you're up for some modding and it only costs £37!
Comments 1 to 13 of 13
ReplyNice mixture of techniques.
Although I didn't realise that a Dremel's routing bit would be that handy; now that I think about it, it makes perfect sense... I really will have to check which bits by dremel-clone came with (and whether it's the attachments I was using or the collets that are wonky...)
Great series.
The glue gun seems to have worked very well - we'll be keeping an eye on it, though. Thanks to everyone who's enjoying it so far!
Cooler Master ATCS 840
Cooler Master Cosmos S
Many of the larger Corsair cases
Also this one by BitFenix looks like it might well fit a triple 120mm rad in the roof, if you're up for some modding and it only costs £37!
-
« Previous
-
1
-
Next »
Discuss in the forums