Published on 25th June 2008 by
Originally Posted by Phil RhodesFor Pete's sake stop calling it a kettle lead. It's not a kettle lead; kettle leads are fused at 13A. It's an IEC mains lead, which is fused at 5 or 6A and doesn't have a cutout in the bottom of it. Compare one some day, and you'll notice that while it's not possible to power a kettle from your computer's power supply lead (the plug won't fit, and the fuse would blow more or less immediately) it is certainly possible to power a PC from a kettle lead. If you do this, it will not be correctly fused, leading to an increased risk of fire.
It's not a kettle lead. Grngh!
Originally Posted by Article * One 55cm 20+4-pin ATX cable
* One 55cm 4-pin EPS 12V cable
* One 55cm 8-pin EPS 12V cable
* One 65nm 6-pin PCI-Express cable
* One 70cm 6+2-pin PCI-Express cable
* Three Molex cables but all have differing connector positions: #1: 30cm, 40cm and 50cm; #2: 40cm, 50cm and 60cm; #3: 45cm, 55cm and 65cm.
* Two SATA cables with differing connector positions at: #1: 40cm, 50cm and 60cm; #2: 45cm, 55cm and 65cm.
Originally Posted by Article I hope the PCI-Express cabel is not 65 nanometers "long"
You are not logged in, please login with your forum account below. If you don't already have an account please register to start contributing.
17th December 2014
15th December 2014
12th December 2014
© Copyright bit-tech