bit-tech.net

Belkin Powerline AV Network Adapters

Comments 26 to 32 of 32

Reply
g3n3tiX 28th December 2008, 22:00 Quote
Good thing to add another wifi access point in the house ^^

Their other problem is that they send a MHz signal through UNSHIELDED wires, and thus your whole wiring becomes an antenna, which is worse than wifi interference wise.
I laugh at those who use this because wifi is "too much radio waves"...
oasked 17th January 2009, 11:40 Quote
Thanks for the review guys, just bought one of these yesterday (at inflated Argos prices unfortunately), but it works brilliantly - no more flakey wirless connection. ;)
gibber 10th March 2009, 14:42 Quote
I've been using powerline networking in my house for a few years. Its a perfect replacement for wireless which has never worked more than a few meters away from the AP for some reason. Its a bottleneck when moving large files, but I dont use my network for that anyway.
Steve Redway 30th April 2009, 11:39 Quote
Power Line Adapters (PLAs) whilst seemingly a good solution to home
networking are essentially a very poor technology. They pollute the
radio spectrum, interfere with your neighbors’ radio (preventing
reception of Short Wave broadcasts) and do not adhere to the European
EMC directives.

They rely upon your internal house wiring to pass signals between
units. Unfortunately, your house wiring is a good aerial and these
signals go far beyond your house, many 100s of yards and in some cases
get into external telephone lines and street wiring and have even been
known to radiate from lamp posts. The units effectively become the
same as an illegal radio transmitter.

The government and OFCOM know the problems regarding PLAs and will
respond when complaints are made by your neighbours, by removing the
devices, so please ensure that the retailer has a sale or return
policy. In a lot of cases involving BT, this translates to BT
replacing the PLAs with CAT5 cabling.

Home networking has a perfectly good wireless system based on the IEEE
802.11 standard (see http://en.wikipedia.org/wiki/IEEE_802.11). This
is commonly called WiFi and operates at frequencies (2.4GHz) that do
not interfere with other equipment. It is legal, adheres to all
European EMC directives and allows you to transfer your broadband and
gaming system throughout the house.

There are campaigns afoot both at local and governmental level to have
PLAs removed from the shops and banned. Australia has already taken
steps to ban PLA devices.

So in reality, they are not such a good idea after all.
badders 30th April 2009, 14:19 Quote
Quote:
Originally Posted by Steve Redway


Home networking has a perfectly good wireless system based on the IEEE
802.11 standard (see http://en.wikipedia.org/wiki/IEEE_802.11). This
is commonly called WiFi and operates at frequencies (2.4GHz) that do
not interfere with other equipment. It is legal, adheres to all
European EMC directives and allows you to transfer your broadband and
gaming system throughout the house.

Err, no it doesn't. It allows you to network PC's in the same room (just), but any further than that and my (apparently lead-lined) walls block the signal.
Bayaz 20th May 2010, 11:26 Quote
All new houses should be required by law to have Cat5e connections in every room! My internet connection is downstairs and my desktop is upstairs. I bought a wireless N adaptor but the signal was very low so my only choices left are powerline or install cat5 cable.
HourBeforeDawn 20th May 2010, 18:11 Quote
Quote:
Originally Posted by Bayaz
All new houses should be required by law to have Cat5e connections in every room! My internet connection is downstairs and my desktop is upstairs. I bought a wireless N adaptor but the signal was very low so my only choices left are powerline or install cat5 cable.

well ya your signal is low, your signal strength is in the horizontal plane not the vertical, what you need to do is run a cable straight to the second floor and put an access point and then your whole upper floor will get better signal.
Log in

You are not logged in, please login with your forum account below. If you don't already have an account please register to start contributing.



Discuss in the forums

More About...