First Look: AMD's Phenom processors

December 13, 2007 | 09:00

Tags: #26 #22 #23 #24 #9500 #9600 #9700 #agena #analysis #benchmarks #cpu #encoding #ghz #mp3 #pcmark #performance #phenom #review #testing

Companies: #amd #divx

Ganged versus Unganged Memory

In the BIOS there's a setting to enable or disable an unganged memory controller. Phenom has two memory controllers inside and usually these will be “ganged” together, meaning they both work together in dual-channel, with data from all the cores sitting in one queue while they wait for a memory access cycle to become available.

However, the alternative is to enable unganged mode which means the two controllers work independently, at potentially different clocks, and each gets a DIMM (or two) to use in its own channel. You lose overall bandwidth, but single-channel performance is usually more efficient and the cores can potentially get access to memory sooner now that there are two of them.

It’s been reported that the ganged mode usually works better for single-core performance, but unganged works better for multi-core. While we ran all the tests using the BIOS default (ganged memory), but it’s down to the motherboard manufacturer to decide what option it sets as standard or even if it offers the option in its BIOS at all.

First Look: AMD's Phenom processors Ganged versus Unganged Memory

Let's have a look at how this option affects performance...

Ganged versus Unganged Memory Bandwidth

Phenom 9900 (4x2.6GHz, 2.0GHz HTT)

  • Ganged Memory
  • Unganged Memory
  • 8544.5
  • 11210.5
0
2500
5000
7500
10000
12500
MB/s

In the results you can clearly see that single channel performance is quite a bit more efficient than dual channel in unganged versus ganged. Unfortunately the current 4.2 edition of Everest only loads a single core when testing memory, so the performance is misrepresented. The latest, patched version of Sisoft Sandra XIII SP1 does support Phenom CPUs and records the results more accurately.

Real World Effects

We tested this effect on multi-threaded heavy tests to see if unganging the memory made a different in real world situations, in a mixture of tests where the Phenom achieved good and bad scores to see if there were further improvements.

Paint.NET x64 3.05

PDNBench, Phenom 9900 (4x2.6GHz, 2.0GHz HTT)

  • Ganged Memory
  • Unganged Memory
  • 26.206
  • 25.980
0
5
10
15
20
25
Time in Seconds (lower is better)

Blender

Internal_SMP, Phenom 9900 (4x2.6GHz, 2.0GHz HTT)

  • Ganged Memory
  • Unganged Memory
  • 60.18
  • 60.44
0
10
20
30
40
50
60
Time in Seconds (lower is better)

x264 Encoding

AutoMKV 0.90, 1.05GB MPEG-2 VOB to 350MB .mp4, LAME MT, Phenom 9900 (4x2.6GHz, 2.0GHz HTT)

  • Ganged Memory
  • Unganged Memory
  • 1289
  • 1284
0
250
500
750
1000
1250
1500
Time in Seconds (lower is better)

Despite there being a significant difference in the synthetic test results of SiSoft Sandra, there's actually very little difference in real world testing. Obviously, the benefit of having an extra memory controllers to use is offset by the fact they have less bandwidth. Either that, or one or both is being mismanaged.
Discuss this in the forums
YouTube logo
MSI MPG Velox 100R Chassis Review

October 14 2021 | 15:04

TOP STORIES

SUGGESTED FOR YOU