Does it feature encryption, unlocked by the RFID key fob, or does it just "unlock" the disk ? (Which *could* be bypassed I think by mounting the drive in another machine and fiddling with it, I think)
Without encryption the system might be useless.
Does anyone know where I could find some Y usb cable like the one on the pic ? (1x miniB, 2x usb male : 1 for power and 1 for signal and power ) as I have a WD passport, which comes with a straight USB to mini B cable, and is sufficient to power it from my PC, but my brother's laptop can't power it, so I need such cable.
I imagine the RFID tag gives the encryption key. Thats why it needs a blank drive to start with, because it assumes all data on the drive is encrypted. If it cant distinguish between which files are encrypted, then all must be otherwise everything you had on there to start with will be turned into rubbish by the decryption.
So, when connecting something like this to a pc, you have to have both the USB connection and the USB power connection? Right? Or can it just pull the power off of the existing mini USB port?
I have a WD passport that just needs one cord, and I love that fact.....
Does the RFID tag have to remain in place the whole time you're using the drive, or just to connect? Given the usual state of my desk, I can see some non-comic moments when shifting things around, knocking the key fob off the exact spot and finding the file copy that had been going on for the last 20 minutes mysteriously aborted...
I happened to review the same enclosure recently and it also works with just one USB-cable connected to the PC. Outlawaol: It's the same 2,5" HDDs inside all of these drives so how do you think some drives would require more power? :)
And also; I tried removing the HDD from the enclosure after the encryption process and swapped it back to a normal casing. Windows didn't find any partitions on it, so I'd say it's encrypted instead of just being "locked". And I also think it's a good thing the drive shows as empty as the thief/the one who finds the lost drive will most likely just considers it new and empty because of that.
Quote:
Originally Posted by Pricester Does the RFID tag have to remain in place the whole time you're using the drive, or just to connect?
You have to just show it to the drive once and it keeps going until you disconnect it.
I'm sorry, but this review seems a little - well half ass-ed
You say its secure because it has RFID - how is it secure? did you even test its secure?
Quote:
And also; I tried removing the HDD from the enclosure after the encryption process and swapped it back to a normal casing. Windows didn't find any partitions on it, so I'd say it's encrypted instead of just being "locked". And I also think it's a good thing the drive shows as empty as the thief/the one who finds the lost drive will most likely just considers it new and empty because of that.
When the encryption is a selling point of this drive (its why your paying the money) - would it not be worth testing this?
How easy is it to bypass the RFID protection? is the encryption actually secure, or just to stop casual's?
Quote:
Outlawaol: It's the same 2,5" HDDs inside all of these drives so how do you think some drives would require more power?
2.5" drives don't have a particular power limit
they are 5v, however they can vary in the Wattage/Amperage they need - i guess this is what would kill it
I also got a WD passport, mainly due to the fact it runs purely off USB which makes life ALOT easier (especially with like laptops)
Please go ahead and tell me how to fake an RFID-tag. I'll be happy to test as soon as you come up with something :) I also have no idea how to test how "secure" an encryption of some HDD is, go ahead and tell some software for testing this as well.
2,5" drives don't have a specified maximal power requirement, but I'd assume they all take pretty much the same current in the 5 V line. (i.e. if one 5400 RPM 2,5" drive works from a single USB-cable then so do most of the others. It depends more on the USB host than the drive...)
Anyone knows where to find a Y usb cable ? I've failed in my search.
My Passport only needs 1 plug, but I might need 2 on another PC because it won't start up.
someone steals it, pop off the end, end of story lol, however, who is going to steal your hard drive, the only modern day thief's are called Chavs and im not sure they even know what a hard drive is lol, have a nice day.
Log in
« Previous
1
Next »
\n');
}
if ( plugin ) {
document.write("");
} else if (!(navigator.appName && navigator.appName.indexOf("Netscape")>=0 && navigator.appVersion.indexOf("2.")>=0)){
document.write("");
}
//-->
\n');
}
if ( plugin ) {
document.write("");
} else if (!(navigator.appName && navigator.appName.indexOf("Netscape")>=0 && navigator.appVersion.indexOf("2.")>=0)){
document.write("");
}
//-->
Comments 1 to 17 of 17
When reviewing Joe, remember to go for the eyes!!
i think it would have something to do with the actual drive, since it has to be formatted first but thats just a guess
Well recognised - Minsc's response when approached by Devin.
Without encryption the system might be useless.
Does anyone know where I could find some Y usb cable like the one on the pic ? (1x miniB, 2x usb male : 1 for power and 1 for signal and power ) as I have a WD passport, which comes with a straight USB to mini B cable, and is sufficient to power it from my PC, but my brother's laptop can't power it, so I need such cable.
I mean you talked about the RFID crap, but you never mentioned EXACLTY how the RFID makes it "secure"
if the data on it is not encrypted, whats the point?
I have a WD passport that just needs one cord, and I love that fact.....
:)
And also; I tried removing the HDD from the enclosure after the encryption process and swapped it back to a normal casing. Windows didn't find any partitions on it, so I'd say it's encrypted instead of just being "locked". And I also think it's a good thing the drive shows as empty as the thief/the one who finds the lost drive will most likely just considers it new and empty because of that.
You have to just show it to the drive once and it keeps going until you disconnect it.
You say its secure because it has RFID - how is it secure? did you even test its secure?
How easy is it to bypass the RFID protection? is the encryption actually secure, or just to stop casual's?
they are 5v, however they can vary in the Wattage/Amperage they need - i guess this is what would kill it
I also got a WD passport, mainly due to the fact it runs purely off USB which makes life ALOT easier (especially with like laptops)
2,5" drives don't have a specified maximal power requirement, but I'd assume they all take pretty much the same current in the 5 V line. (i.e. if one 5400 RPM 2,5" drive works from a single USB-cable then so do most of the others. It depends more on the USB host than the drive...)
My Passport only needs 1 plug, but I might need 2 on another PC because it won't start up.
As for encryption : I read an article about a similar hdd w/ rfid, and the guy tested the "encryption" (it was just a xor, claiming AES !)
http://www.heise-online.co.uk/security/Enclosed-but-not-encrypted--/features/110136/0
So much for security.
IT APPLIES TO THIS DISK !! (read end of article)