Originally Posted by article level or further engineering.
should that be of?
Also, with the slightly tighter timings on the RAM would it be possible to request a re-run of the Photo test? To see what kind of a difference it made?
The only problem I can see are those DIMM slots. I know you say they don't get in the way of the GPU, but on my Asus A8N-SLi Deluxe, the memory fits in, but you can swap moduals while the GOU is in there, which is a pain when you've got a water-block on there ect.
DDR2 still seems king until at least after Christmas...
Also, with the slightly tighter timings on the RAM would it be possible to request a re-run of the Photo test? To see what kind of a difference it made?
I'm doing a separate DDR3 article where I am evaluating both P5K3 and P5K boards directly and at DDR3 speeds of 800/1066/1333 and 1600 (if I can get it to work at 1600. It's not playing ball atm :()
Doc: I'm still looking for a utility that will test it properly and consistently. In theory, PCI-Express is better because it doesn't share a bus, but I can't give you solid numbers.
Originally Posted by Dr. Strangelove Out of curiosity, is there a big difference in the network performance between the gigabit ethernet port running on the PCI-Express and the PCI one?
Because of the difference between the way PCI and PCI-Express works, when you start adding more devices onto the PCI bus, the existing devices start to bottleneck (especially "throughput" orientated devices like network adapters and disk controllers) and you actually lose performance.
Theoretically, you can get Gigabit throughput on a PCI-based Gigabit Ethernet controller in perfect conditions if there are no other devices using the bus (33MHz * 32-bit = 1056Mbit/sec), but no condition is ever perfect. It's much easier to achieve maximum throughput on a PCI-Express based device because these limitations aren't in place.
Originally Posted by Tim S Because of the difference between the way PCI and PCI-Express works, when you start adding more devices onto the PCI bus, the existing devices start to bottleneck (especially "throughput" orientated devices like network adapters and disk controllers) and you actually lose performance.
Theoretically, you can get Gigabit throughput on a PCI-based Gigabit Ethernet controller in perfect conditions if there are no other devices using the bus (33MHz * 32-bit = 1056Mbit/sec), but no condition is ever perfect. It's much easier to achieve maximum throughput on a PCI-Express based device because these limitations aren't in place.
Quote:
Originally Posted by Bindibadgi I'm still looking for a utility that will test it properly and consistently. In theory, PCI-Express is better because it doesn't share a bus, but I can't give you solid numbers.
Yeah I figured the answer would be something like that, but that is all theory.. I was wondering if there was a "real life" effect, I can see how that is difficult to test as people will have different numbers of PCI cards in their rigs, but I think most would have no more than say a sound card installed (correct me if I'm wrong). Considering this board seems to come with everything including a coffeemaker and a foot massager, would be interesting just to see if there was a difference with no extra cards in.
->Bindibadgi, I think saw some network tests done with a program called something like chariot, not sure if i remember correctly or whether it's any good
I feel sorry for those that think they can live with the Analog Devices sound chips seen in Asus boards.. It's a bit like thinkg you can live with drugs! I've had so terrible head**** with the drivers I can't describe it here due to the censorship, but I guess you can figure out yourselves how pissed I am. It's not like you couldn't use the integrated sound card at all or the quality was terrible, but cmon the drivers! I really don't want to open them even every setting would be wrong, because I know I'll just get a terrible headache.
For a high-end mobo I'd really love to see something a bit more.
Doc: Thanks! I'll look it up. For most people 10/100 will be enough unless you're frequently copying large files. Even HD streaming over Fast 100M Ethernet is doable. I used it with a NAS box we've got at my parents house and only when my bro & sis are watching video from it and my dad is copying files to/from it it starts to chug and we could do with Gigabit.
ADI sound chips are ****ing awful. When I see Asus at Computex I'm certainly gonna ask WTF they are doing.
I really like this mother board I have done all the reading up on it at Asus' website www.asus.com
There is only a few problems with it it uses the Intel P35 chipset but doesn't have PCIe 2.0, Intel only released that info after the boards were made :'( also it is now out of date because of the Intel X38 chipset :( buy the time i can aford one of thies boards there will be a much better one :( we need to hear what companies like Asus and Intel are thinking for a year ahead, then I can plan a buget and build an awsome PC as soon as the parts come out
But you get to buy a whole new board with P35 and PCIe 2.0 sometime later. In hindsight though, noone needs PCIe 2.0 until a graphics card supports it.
Originally Posted by Bindibadgi But you get to buy a whole new board with P35 and PCIe 2.0 sometime later. In hindsight though, noone needs PCIe 2.0 until a graphics card supports it.
I know there is no need for it now but mother boards support 45nm processors and do you see any of them out yet. it is good to be ahead now then you don't have to be behind later. there is always the fear that the companies will go a different way, but you can't look for that and always be right. if you have an idea of what you want that is based on what is out now then you will only be disaponted with not having what comes out later. I plan for what will get the job done and thats as fare as it goes. that way I don't feel bad that I don't have the best, I have what I need.
Originally Posted by ./^\.Ace./^\. I know there is no need for it now but mother boards support 45nm processors and do you see any of them out yet. it is good to be ahead now then you don't have to be behind later. there is always the fear that the companies will go a different way, but you can't look for that and always be right. if you have an idea of what you want that is based on what is out now then you will only be disaponted with not having what comes out later. I plan for what will get the job done and thats as fare as it goes. that way I don't feel bad that I don't have the best, I have what I need.
45nm will provide a noticeable performance increment and power drop. PCI-Express 2.0 will not.
ABM: No. This is an Intel motherboard, not an AMD one. You're after something AM2+ (ideally). Welcome, but please don't use size= and coloured text in your posts. Thanks :)
Hi,
Sorry for the pathetic formatting previously...
Anyways, actually I have bought the AMD 64 fx74 processor. Now, I am looking for some DDR3 supporting board, in order to conduct my GPU's project effectively. I googled AM2+ but the one available these days is not supporting DDR3 memory.
Any suggestion?
Please reply!!
Comments 1 to 21 of 21
"Supports up to Supports up to 8GB of dual channel DDR3 800, 1066 and 1333MHz FSB, using four 240-pin, 1.5V DDR3 DIMMs;"
:D
Also, with the slightly tighter timings on the RAM would it be possible to request a re-run of the Photo test? To see what kind of a difference it made?
DDR2 still seems king until at least after Christmas...
I'm doing a separate DDR3 article where I am evaluating both P5K3 and P5K boards directly and at DDR3 speeds of 800/1066/1333 and 1600 (if I can get it to work at 1600. It's not playing ball atm :()
Doc: I'm still looking for a utility that will test it properly and consistently. In theory, PCI-Express is better because it doesn't share a bus, but I can't give you solid numbers.
Theoretically, you can get Gigabit throughput on a PCI-based Gigabit Ethernet controller in perfect conditions if there are no other devices using the bus (33MHz * 32-bit = 1056Mbit/sec), but no condition is ever perfect. It's much easier to achieve maximum throughput on a PCI-Express based device because these limitations aren't in place.
->Bindibadgi, I think saw some network tests done with a program called something like chariot, not sure if i remember correctly or whether it's any good
For a high-end mobo I'd really love to see something a bit more.
ADI sound chips are ****ing awful. When I see Asus at Computex I'm certainly gonna ask WTF they are doing.
Bindi @ Yeah, you give'm what for! :D
There is only a few problems with it it uses the Intel P35 chipset but doesn't have PCIe 2.0, Intel only released that info after the boards were made :'( also it is now out of date because of the Intel X38 chipset :( buy the time i can aford one of thies boards there will be a much better one :( we need to hear what companies like Asus and Intel are thinking for a year ahead, then I can plan a buget and build an awsome PC as soon as the parts come out
stop bumping threads with useless information and flawed arguments
Does "AMD ATHLON 64 FX-74" Compatible with "Asus P5K3 Deluxe" OR any other DDR3 ASUS' Mainboard??
Regards,
_ABM
~ Vulcan Raven, Giant & Shaman
45nm will provide a noticeable performance increment and power drop. PCI-Express 2.0 will not.
ABM: No. This is an Intel motherboard, not an AMD one. You're after something AM2+ (ideally). Welcome, but please don't use size= and coloured text in your posts. Thanks :)
Sorry for the pathetic formatting previously...
Anyways, actually I have bought the AMD 64 fx74 processor. Now, I am looking for some DDR3 supporting board, in order to conduct my GPU's project effectively. I googled AM2+ but the one available these days is not supporting DDR3 memory.
Any suggestion?
Please reply!!
Regards,
Adeel
aka: ABM